Thursday 11 September 2014

Etching

When I did my Fine Art degree in the 90's I specialised in the printmaking technique of Etching.

One of my first etchings of the stairs in Harlech Castle, Wales.
  • Heres a basic guide to etching: Etching involves a metal plate being covered with a waxy ground which is resistant to acid. The image is then scraped though the ground with a pointed etching needle so the bare metal is exposed. The metal plate is then put into a bath of acid which bites into the exposed metal leaving grooves. The ground is then cleaned off the plate ready for printing. The plate is inked all over and then the ink wiped off the surface, leaving only the ink in the etched lines which is then put through an etching press which forces the ink into the paper.

Wednesday 3 September 2014

Printing a Penguin Cat!

My new collagraph print Penguin Cat is hot off the press today!

Penguin Cat Collagraph Print
I couldn't resist putting my black and white cat Morpheus with a group of black and white penguins, he looks so happy but I don't think they are so sure of him!

Heres my collagraph printing plate before it is printed. Notice I always have to work backwards and dark to light!

Collagraph Print: Print created from a card plate made by adding glue, paint, enamel etc. This holds the ink in varying degrees and is then printed through the intaglio process.

Heres where it starts to get messy! Etching ink with a touch of extender medium is applied to the printing plate all over getting into every crevice of the plate.

The ink is then gradually wiped off and the image is starting to appear.

Final wipe with some tissue paper. The ink is retained in any areas that are textured and the smoother the area the ink is wiped off.

The collagraph printing plate ready to be printed on my little table top etching press. Slightly dampned paper is placed over the plate and then the blanket over this and then the whole lot is rolled through the press. The weight of the roller will force the ink onto the paper slightly embossing the paper.

Always the exciting bit as you never know if the print will have worked or not until you lift the paper!


The final print hot off the press!
Lots of prints waiting to dry.
Clare xx